Axis Parameters

This chapter provides details about the parameters for the backgauge axis, handwheel, and regrip axis (if applicable).

Backgauge Axis configuration

The RA smart controls configure the backgauge axis, regrip axis, and bending aid axis automatically using the machine ID. This ensures accurate positioning, collision checks, and precise simulation.

Backgauge axes enable precise sheet metal positioning, ranging from simple single-axis systems (X) to advanced multi-axis setups (X1/X2, R1/R2, Z1/Z2). These axes control depth (X), height (R), and lateral position (Z) for complex bending operations.

Regrip axes (FL1/FR1) facilitate repositioning of the sheet during bending, enabling multi-step bends without manual intervention.

Bending aid axes (S1/S2) provide additional support for handling larger or heavier sheets, enhancing stability during bending operations.

Backgauge Axis Types:

X-Axis: Controls forward and backward movement.
X1/X2 Axes: Independent control for tapered bends.
R-Axis: Controls up and down movement.
R1/R2 Axes: Independent up and down movement for multi-level bending.
Z-Axis: Controls left and right movement.
Z1/Z2 Axes: Independent left and right movement for asymmetrical parts.
FL1/FR1 Axes: Control the regrip mechanism for repositioning the sheet.
S1/S2 Axes: Control bending aid mechanisms for additional support.

A machine configured with all the above-mentioned axis settings would appear as follows:

The parameters for X1 and X2 are the same as those for the X axis. Similarly, R1/R2, Z1/Z2, FL1/FR1, and S1/S2 axes share identical parameters. Therefore, only the X axis parameters are described in detail in this chapter. Additionally, parameters unique to specific axes are discussed in their respective sections.

The followings settings are explained in this chapter: